HydroPad®
High-performance, breathable, tri-polymer waterproofing gel reinforced with high-density quartz microspheres. Advanced 4-Way Flex formulation with superfluid and thixotropic properties and an ultra-low cement content. Optimised for waterproofing high-stress areas such as swimming pools, terraces, showers and damp rooms.
Waiting time between the first and second coats: 4 hours | Ready for tiling in 12 hours.
Coverage: 2.3 kg/m² in two coats. Powered by 4-Way Flex® technology.
Waiting time between the first and second coats: 4 hours | Ready for tiling in 12 hours.
Coverage: 2.3 kg/m² in two coats. Powered by 4-Way Flex® technology.
Product description
High-performance, breathable waterproofing gel formulated with an advanced tri-polymer matrix and active quartz microspheres, offering superior flexibility thanks to 4-Way Flex® technology. Variable superfluid and thixotropic rheology, with an extremely low cement content, for waterproofing swimming pools, terraces and showers prior to the installation of tiles and natural stone.It is easily applied using a smooth steel trowel, a roller or a brush, even on large surfaces, and, when used in combination with accessories from the HydroBand Anti-Fracture range, creates a continuous waterproof barrier for swimming pools, outdoor areas and damp environments.It can also be applied over non-absorbent materials, such as existing old tiles.HydroPad® has a working time of over 1 hour, with a waiting time of 4 hours before applying the second coat and 12 hours before laying the covering; it is recommended for particularly hot and humid climates.Classified as CM 02 P – EN 14891
Advantages
The unique feature of the proprietary 4-Way Flex® technology is its ability to deform along all directions of movement: longitudinal, transverse, vertical and torsional, preventing micro-cracking and delamination even in the presence of unstable substrates.
The membrane ‘actively breathes’, adapting to the residual moisture in the substrate.
HydroPad® can be applied quickly and easily with a trowel, roller or brush to form a uniform finish on large horizontal and vertical surfaces, both absorbent and non-absorbent, whilst maintaining its exceptional flow properties even under extreme conditions of direct sunlight and in hot, breezy climates.
It can also be applied as an overlay on non-absorbent materials, such as existing old ceramic tiles, and requires minimal waiting times before applying the second coat and laying the covering.
Attachments
Technical data sheet
- it
- en
- fr
- de
- es
DOP
- it
- en
- fr
- de
