HydroPad® SuperFast
A fast-curing, breathable, tri-polymer waterproofing gel, reinforced with quartz microspheres
and featuring 4-Way Flex thixotropic and fluid flexibility with an ultra-low cement content, for waterproofing swimming pools, terraces, showers and damp areas.
Waiting time between 1st and 2nd coats: 1 hour | Ready for tiling in 3 hours.
Coverage: 2.3 kg/m² in two coats. Powered by 4-Way Flex® technology.
and featuring 4-Way Flex thixotropic and fluid flexibility with an ultra-low cement content, for waterproofing swimming pools, terraces, showers and damp areas.
Waiting time between 1st and 2nd coats: 1 hour | Ready for tiling in 3 hours.
Coverage: 2.3 kg/m² in two coats. Powered by 4-Way Flex® technology.
Product description
High-performance, breathable waterproofing gel with ultra-fast curing, formulated with an advanced tri-polymer matrix and active quartz microspheres, offering exceptional flexibility thanks to 4-Way Flex® technology. Variable superfluid and thixotropic rheology, with an extremely low cement content, for waterproofing swimming pools, terraces and showers prior to the installation of tiles and natural stone. It is easily applied with a smooth steel trowel and, when used in combination with the HydroBand Anti-Fracture range of accessories, creates a continuous waterproof barrier for swimming pools, outdoor areas and damp environments.It can also be applied over non-absorbent materials such as existing old tiles.HydroPad® SuperFast has a working time of over 30 minutes, with a waiting time of 1 hour before applying the second coat and 3 hours before laying the covering; it is designed for harsher climates, where night-time temperatures can drop below freezing and where site requirements demand rapid installation times.Classified as CM 02 P – EN 14891
Advantages
The unique feature of the proprietary 4-Way Flex® technology is its ability to deform along all directions of movement: longitudinal, transverse, vertical and torsional, preventing micro-cracking and delamination even in the presence of unstable substrates.
The membrane ‘actively breathes’, adapting to the residual moisture in the substrate.
HydroPad® Fast spreads evenly, quickly and easily using a trowel, roller or brush on large horizontal and vertical surfaces, both absorbent and non-absorbent, without compromising its exceptional flow properties, even under extreme conditions of direct sunlight and in hot, breezy climates.
HydroPad® Fast has the same workability as the standard-setting gel but with faster setting times in the event of uncertain weather conditions and a risk of rain in the first few hours after application; it requires shorter waiting times for the application of the second coat and for the installation of the cladding.
Attachments
Technical data sheet
- it
- en
- fr
- de
- es
DOP
- it
- en
- fr
- de
- es
