Advanced elastomeric membrane in Gel with waterproof and anti-fracture properties for high-performance waterproofing of pools, terraces, showers, and critical surfaces.
Thanks to its 6-dimensional multidirectional elasticity, the Gel ensures dynamic stress compensation and prevents the formation of microcracks in ceramic installations, with exceptional tensile adhesion strength.
Engineered with 6-Dimensional Elasticity technology.
Does not require reinforcement mesh, tapes, or strips for waterproofing corners or edges.
Maintains elasticity and all high-tech performance even after being reopened and reused.
Formula pending International Patent.
Co-engineered with PowerGel®S1+ to form the High-Adhesion Anti-Fracture System - TileSafe System.

High-performance tri-polymeric waterproofing gel, breathable and reinforced with high-density quartz microspheres. Advanced 4-Way Flex formulation with superfluid and thixotropic behavior and ultra-reduced cement content.
Optimized for waterproofing high-stress environments such as swimming pools, terraces, showers, and damp rooms.
Powered by 4-Way Flex technology.

Non-woven anti-fracture fabric made of thermally-modified needle-punched polyester, designed for structural reinforcement in advanced systems based on SafetyGel® elastomeric gel.
Available in 2 variants: SafetyTex Anti-Fracture 100 and SafetyTex Anti-Fracture 20 to adapt to project needs on different scales.

High-strength alkali-resistant glass fibre structural mesh. Designed for full integration with advanced HydroPad® systems, it ensures uniform stress distribution and prevents micro-cracks on critical substrates.

Continuous elastomeric tape for the active management of mechanical stresses and the prevention of fractures in critical areas. It guarantees the waterproofing of wall-floor and wall-wall junctions, slope changes and movement, control, expansion isolation and perimeter joints in swimming pools, terraces, showers and wet rooms.

Elastomeric TPE tape with molecular memory, developed to absorb micro-movements and maintain the waterproof continuity of structural joints in swimming pools, terraces and outdoor spaces where dynamic stresses are higher.

Elastic two-component cementitious mortar, resistant to temperatures down to -20°C and to chlorinated water, also applicable by roller and brush, for waterproofing indoor wet areas, balconies, terraces, tubs and swimming pools.

Elastic two-component cementitious mortar, resistant to temperatures down to -20°C and to chlorinated water, fibre-reinforced, for waterproofing indoor wet areas, balconies, terraces, tubs and swimming pools.

Anti-alkaline, fibreglass reinforcement mesh.

Preformed waterproofing vapor barrier membrane in rolls for under-tile waterproofing in swimming pools, terraces, damp rooms and showers.

Separation, anti-fracture, waterproofing membrane for the installation of flooring even in the most difficult situations. For interiors-exteriors.

High-performance, multi-purpose hybrid sealant and adhesive, develops the highest adhesions on a wide range of materials, even on wet surfaces.
Suitable for applications subject to high humidity such as swimming pools, terraces, damp rooms and showers. Resistant to UV rays, aging and chemical agents.